Filter regulator, G 3/8", 0.5 - 10 bar, 900 l/min, metal without sight glass, drain semi-automatic

This filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. The data sheet gives a pressure control range of 0.5 - 10 bar. This version is listed with port thread G 3/8", overall height 239 mm, dimension H1 100 mm, dimension L 54 mm and flow rate 900 l/min. The stated material is zinc die casting Z410. This version is supplied with a metal bowl without a sight glass and condensate drain semi-automatic.

Benefits

• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 25 bar.
• Flow rate of 900 l/min through the port thread G 3/8".
• Sintered filter with a pore size of 5 µm and an additional centrifugal pre-separation stage.
• Condensate drain semi-automatic in the metal bowl without a sight glass for a condensate volume of up to 35 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 16 bar.

Technical data

Applications

In the air service unit of a compressed air system the device controls the working pressure in the range 0.5 - 10 bar.

Standards and conformity

The filter regulator counts as equipment without its own potential source of ignition in line with Directive 2014/34/EU.