Filter regulator, G 1/2", 0.5 - 16 bar, 1500 l/min, metal without sight glass, drain semi-automatic

Once installed, the filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. The article is listed with a pressure control range of 0.5 - 16 bar. This version is listed with port thread G 1/2", overall height 270 mm, dimension H1 118 mm, dimension L 70 mm and flow rate 1500 l/min. Material zinc die casting Z410 is listed for this version. Also stated are a metal bowl without a sight glass and condensate drain semi-automatic.

Benefits

• Pressure control range 0.5 - 16 bar at an inlet pressure of 1.5 - 25 bar.
• Flow rate of 1500 l/min through the port thread G 1/2".
• Sintered filter with a pore size of 40 µm and an additional centrifugal pre-separation stage.
• Condensate drain semi-automatic in the metal bowl without a sight glass for a condensate volume of up to 50 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 25 bar.

Technical data

Applications

Upstream of cylinders, valve terminals and tools the regulator supplies a flow of 1500 l/min through G 1/2".

Standards and conformity

The filter regulator counts as equipment without its own potential source of ignition in line with Directive 2014/34/EU.