Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Full stroke safety valve DN 8, G 1/4, Trigger pressure 7.4 bar

Full stroke safety valve DN 8, G 1/4, Trigger pressure 7.4 bar - Riegler 104002

RIEGLER Original product
Net price (excl. VAT)
€29.61
Item RGL-104002
Manufacturer no. 226.01-7,4
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.226.01-7,4
EAN4047322297257
Country of originGermany
Customs tariff number84814090
ConditionNew
Artikel
RGL-104002

Full stroke safety valve DN 8, Brass, Operating temperature -25 °C to 180 °C, G 1/4, AF 20, Trigger pressure 7.4 bar, Type tested For compressed air and non-toxic, non-flammable gases, cannot be used for liquids due to free blow-off, not suitable for steam. These valves are TÜV approved and have a TÜV type test number.

Technical data

Min. operating pressure0.2 bar
Max. operating pressure50 bar
Min. operating temperature-25 °C
Max. operating temperature180 °C
Housingbrass
SealantFKM
ThreadG 1/4
Min. set pressure7.4 bar
a/f20 mm
A18.0 mm
C63.0 mm
D10.0 mm
Pressure springStainless steel

Standards and origin

  • Customs tariff number: 84814090
  • Country of origin: DE

About Safety valves and Pressure limiting valves

Safety valves cap the pressure in a system and vent as soon as the preset set pressure is reached. This range covers set pressures from 0.2 to 50 bar and installs directly in the line via threads from G 1/4 to G 2. That lets you match overpressure protection to the actual operating point rather than to a standard step.

What matters when choosing

  • Set pressure: the range runs from 0.2 to 50 bar. The value has to sit above the system operating pressure and below the rating of the weakest protected component.
  • Thread: G 1/4 through G 2 are available, some as male threads (G 1/2 AG, G 3/4 AG, G 1 AG, G 2 AG). Port size determines how much can actually be discharged when the valve lifts.
  • Body material: brass, gunmetal or zinc die-cast with silver paint finish. Gunmetal appears in the steam versions, and 14 items are listed in stainless steel 1.4305.
  • Sealing material NBR, FKM or FPM: pick the elastomer to suit the medium and the temperature at the installation point.
  • Temperature window: lower operating limits fall between -40 and -10 °C, upper limits between 110 and 260 °C. This narrows down which versions are usable at all.

Typical applications

  • Protecting compressed air receivers and compressor stations against inadmissible overpressure
  • Overpressure protection on steam and hot water installations
  • Backup downstream of pressure reducers in case the regulator fails open
  • Protection of heat exchangers and storage vessels in process plants
  • Capping pressure in individual sub-circuits that run at their own level

All 1931 items in this group are recorded with DE as country of origin. Where corrosion resistance matters, 14 versions are available in stainless steel 1.4305.

More Information
Weight 0.082000
Manufacturer Riegler
Hersteller-Nr 226.01-7,4
EAN 4047322297257
Zolltarifnummer 84814090
GPSR Herstellerdaten Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de
Artikelzustand New
Artikel-Authentizität Original product
Country of Manufacture Germany
Material Brass
Thread G 1/4
Set pressure [bar] 7,4
Seal material FKM
Housing material Brass
Betriebsdruck max [bar] 50.000000
Pneumatic connection G1/4
Temperature (max.) 180