Reducing sleeve 246, Rp 1/2 IT, R 1/4 ET - Riegler 133774

Reducing sleeve 246, Rp 1/2 IT, R 1/4 ET, black malleable iron fitting, operating temp. -20 °C to 300 °C, ISO 7-1 According to DIN EN 10242 (previously 2950). Malleable iron cast fittings in black steel, non-galvanized, is the classic fitting series in connection series in piping construction. Our malleable iron cast fittings are characterized by high mechanical strength and standardized fitting technology. Working minimal temperature = -20 °C, 25 bar. Working pressure for temperature range from -20 °C to 120 °C: 25 bar. Working pressure for temperature range from 120 °C to 300 °C: 20-25 bar.

Standards and origin

• Standard thread: ISO 7-1
• Customs tariff number: 73071910
• Country of origin: CN

About Sockets, reducing

The reducing sleeve figure 246 combines two thread sizes in one part, a parallel Rp thread inside and a tapered R thread outside. It is screwed into the larger fitting and then takes the smaller line, so no extra intermediate piece is needed. Sizes run from Rp 3/8 up to Rp 3.

What matters when choosing

• Thread 1, the female side: Rp 3/8 to Rp 3. This is where the smaller line is connected.
• Thread 2, the male side: R 1/4 to R 2 1/2. It has to match the female thread of the part the sleeve is screwed into.
• Size step: the documented pairings range from a small step such as Rp 1/2 to R 3/8 up to large ones such as Rp 1 1/2 to R 1. A large step in one part saves components but narrows the bore abruptly.
• Thread standard: all 30 items follow ISO 7-1. The tapered male thread seals in the thread itself and needs an approved sealing compound.
• Finish and material: black malleable cast iron B350-10 design symbol A, hot dip galvanised, with a surface quality to DIN 2444. This governs corrosion protection and mechanical strength in pipework.

Typical applications

• Threaded pipework for compressed air, water and heating systems
• Connecting smaller branches to a larger main line
• Maintenance work where a spare part with a different port size is installed
• Fire fighting and sprinkler lines with screwed joints
• Plant sections running up to 300 °C, such as steam and hot water lines

All 30 items are black malleable cast iron B350-10 design symbol A to DIN EN 10242, hot dip galvanised and with a surface quality to DIN 2444, covering a temperature range from -20 °C to 300 °C. Production is in China.