Glycerine pressure gauge »pressure line« G 1/4, 0-400bar/6000 psi - Riegler 116316

Glycerine press. gauge »pressure line« Connection radial bottom, G 1/4, Goods class 1.6, Measurement range 0-400 bar/6000 psi, Ø63 Low-priced series of high-quality, glycerine-filled pressure gauges with stainless steel housing for all applications involving measurements in areas with high dynamic pressure loads and vibration levels. Suitable for gaseous or liquid media which do not corrode copper alloy, do not have high viscosity and do not crystallise.

Standards and origin

• Customs tariff number: 90262040
• Country of origin: TW

About Glycerine-filled pressure gauges

The glycerine filling damps the pointer and protects the movement where pressure surges and vibration would quickly ruin a dry gauge. The group covers ranges up to 600 bar in nominal sizes from 63 to 160 mm. Connection is G 1/4 or G 1/2 male.

What matters when choosing

• Max. measuring range: Full-scale values reach 600 bar, and part of the scales start in vacuum at -1 bar. Set the range so that working pressure does not sit at the end of the scale.
• Diameter: 63 to 160 mm. This drives readability and the space needed on the power unit or in the panel.
• Thread: G 1/4 and G 1/2 male. The larger version usually goes with the bigger case sizes and with measuring points under heavier mechanical load.
• Housing: CrNi steel 1.4301, pressed brass and black plastic with a front flange are available. The front flange version is the one for panel mounting.
• Medium temperature: Rated from -20 °C at the low end to 60 to 100 °C depending on version. Hotter media call for a cooling section ahead of the gauge.

Typical applications

• Hydraulic power units with pulsating pump delivery.
• Compressors where the pointer would otherwise oscillate continuously.
• Mobile machines and attachments exposed to chassis vibration.
• Test benches with rapid pressure changes.
• Pump and filter stations where the reading is watched throughout operation.

All 387 items are glycerine-filled bourdon tube gauges with a case in CrNi steel 1.4301, pressed brass or black plastic. Production takes place in Poland, Taiwan and Germany.