Corner safety valve, for saturated steam and compressed air, G 3/4", DN 13, 1.0 bar, gunmetal

A steam boiler must not exceed its permissible working pressure, not even when the control system fails. This corner safety valve opens at a fixed set pressure of 1.0 bar and releases the excess pressure to atmosphere. The connection is G 3/4" with a nominal size of DN 13. The discharge capacity is 53 m³/h of compressed air. A gunmetal body, a spring steel spring and a seal of EPDM cover the temperature range of -40 to +150 °C.

Advantages

• Fixed set pressure of 1.0 bar, so the protection is unambiguous without any adjustment on site.
• Discharge capacity of 53 m³/h of compressed air at DN 13, sufficient for the matching receiver or compressor.
• Discharge capacity of 42 kg/h of steam, which also makes the valve usable on steam boilers to TRD group 1.
• Gunmetal body, spring steel spring and a seal of EPDM, matched to steam, compressed air and other non-toxic, non-flammable gases.
• Connection G 3/4" with nominal size DN 13 and 32 mm across flats, so an ordinary spanner is enough for installation.

Technical data

Applications

Pressure vessels in plant engineering with nominal size DN 13. Protection of headers with a discharge capacity of 53 m³/h. Test rigs and experimental setups limited to 1.0 bar. Installation in tight spaces where the corner design with 31 mm face-to-centre length saves room.

Standards and conformity

The valve is type tested and carries the component identification TÜV-SV...-312.13.D/G.0,28 CE0036 1 bar. It is supplied with a fixed setting only, so the set pressure of 1.0 bar cannot be altered. A setting certificate to 3.1 is available on request. The version is approved for saturated steam and for steam boilers to TRD group 1.