Safety valve, type-approved, preset and sealed, G 3/8", DN 10, 18.70 bar, brass

This free-blowing safety valve protects compressed air systems against exceeding 18.70 bar. At full lift it discharges 799.5 m³/h and thus limits the pressure rise in vessel and pipework. It is fitted with a G 3/8" thread, works in nominal size DN 10 and is made of brass.

Benefits

• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 18,7 bar.
• Free-blowing design without collecting line, the 799.5 m³/h are released directly to the atmosphere.
• Self-acting operation without auxiliary power, the valve recloses once the pressure has fallen below 18.70 bar.
• Fixed setting at 18.70 bar and lead-sealed, so the set pressure is protected against unauthorised adjustment.

Technical data

Applications

• Test benches and machines whose system pressure has to be limited to a fixed value.
• Control air circuits that are protected against pressure peaks.
• Manifolds and receivers with a G 3/8" connection.
• Installations with requirements on the resistance of the material brass.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 18.7 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 18.70 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.