Safety valve, preset and lead-sealed, G 3/4", DN 10, 6.00 bar, nickel-plated brass

To protect compressed air and other non-toxic, non-flammable gases, this valve opens at 6.00 bar. Up to 281.5 m³/h are released freely into the surrounding air. The G 3/4" thread, nominal size DN 10 and the material nickel-plated brass determine the installation.

Benefits

• The set value of 6.00 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 281.5 m³/h, referred to the set pressure of 6.00 bar.
• Screwed in through G 3/4" in DN 10 and tightened at the 32 mm wrench flat.
• Type approval documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 6 bar.
• Overall height H of 75 mm and height h of 16 mm, so the space required is known before installation.

Applications

• Use on compressors and air treatment units where up to 281.5 m³/h have to be discharged.
• Protection of gas lines carrying non-toxic, non-flammable gases up to 6.00 bar.
• Installation in systems with operating temperatures between -25 and +180 °C.

Standards and conformity

The delivery is based on the type approval, documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 6 bar with the notified body CE0036. The set pressure of 6.00 bar is adjusted and sealed at the factory, adjustment on site is not intended. Fixed settings between 0.2 and 50 bar are possible. On request the valve comes with an NPT thread and with a setting certificate.