Safety valve, preset and lead-sealed, G 3/4", DN 10, 41.50 bar, brass

From 41.50 bar upwards this safety valve opens by itself and releases up to 1731.7 m³/h of gas to the surrounding air. Once the pressure has dropped it closes again without any intervention. Installation uses the G 3/4" thread, nominal size DN 10 and a body made of brass.

Benefits

• The G 3/4" thread and nominal size DN 10 suit common compressed air manifolds, spanner size 32 mm.
• Body made of brass, approved for compressed air and other non-toxic, non-flammable gases.
• The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 41,5 bar documents the type approval of the valve.
• Factory set to 41.50 bar and lead-sealed, so the set pressure is protected against unauthorised adjustment.
• At 41.50 bar the valve releases 1731.7 m³/h, a figure that applies to free discharge into the surrounding air.

Technical data

Applications

• Test benches and machines where the set pressure of 41.50 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 41.50 bar.
• Protection of pipes and fittings in compressed air networks with a G 3/4" connection.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 41,5 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 41.50 bar. An NPT thread and a setting certificate are available as options.