Safety valve, preset and lead-sealed, G 3/4", DN 10, 3.50 bar, stainless steel 1.4571

Wherever a compressed air receiver or a pipe has to be protected against overpressure, this spring-loaded valve does the job without auxiliary power. It responds at 3.50 bar and discharges up to 154.1 m³/h. The connection is the G 3/4" thread in nominal size DN 10, and the body is made of stainless steel 1.4571.

Benefits

• Set pressure adjusted to 3.50 bar and sealed at the factory, no readjustment on site is required.
• Tested discharge capacity of 154.1 m³/h, which allows the protection to be verified by calculation.
• G 3/4" connection thread in nominal size DN 10, fitted with a 32 mm spanner size.
• The FKM sealing material allows operating temperatures from -25 to +180 °C.
• Valve body in stainless steel 1.4571, matching compressed air and non-toxic, non-flammable gases.

Technical data

Applications

• Installation in systems with operating temperatures between -25 and +180 °C.
• Test benches and machines where the set pressure of 3.50 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 3.50 bar.

Standards and conformity

The valve is type-approved and carries the component identification TÜV.SV...-882.10.D/G.0.61 CE0036 3,5 bar. The marking states the notified body CE0036 and the set pressure. Delivery is exclusively with a fixed setting, fixed values between 0.2 and 50 bar are possible. A setting certificate and an NPT thread are available as options.