Air service unit, G 1/2", 0.5-10 bar, with bowl guard, L 236 mm, filter 5 µm, automatic drain

As a air service unit the article filters the compressed air, regulates it to the set pressure and adds oil. The data state a pressure control range of 0.5 - 10 bar. This version is listed with a face-to-face length of 236 mm and an overall height of 201.0 mm. Material zinc die casting Z410 with NBR diaphragm and seals is listed for this version. Also stated are the G 1/2" port, a pore size of 5 µm, the with bowl guard and L 236 mm, filter 5 µm, automatic drain.

Benefits

• Filter, relieving regulator and lubricator on the G 1/2" port.
• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate 50 - 1400 l/min at a filter pore size of 5 µm.
• Oil reservoir 110 cm³ and condensate volume up to 50 cm³.
• Lubricator response limit at 6 bar 50 l/min.
• Automatic venting when the secondary side is over pressure, oil can be topped up under pressure.

Technical data

Applications

In dusty surroundings the plastic bowl with protective cage protects the condensate from view and impact, the drain works automatic.