5/3-way solenoid valve, centre position closed, ATEX approval, G 1/4", 230 V AC, 1500 l/min

A double-acting actuator needs a valve that switches the air path reliably and delivers the required flow. This 5/3-way solenoid valve with connection G 1/4" passes 1500 l/min and is controlled with 230 V AC. The switching function is centre position closed. The actuator can therefore be switched straight from the machine control without an extra pilot stage.

Advantages

• Temperature range of -10 to +70 °C, which covers use in the machine room as well as outdoors.
• Connection G 1/4" and exhaust G 1/4", so the piping follows the existing line network.
• ATEX marking II 2G Ex mb IIC T5 IP65 & II 2D Ex mb tb IIIC T95°C IP65 to directive 2014/34/EU.
• Control voltage tolerance plus/minus 10 percent, which makes short supply dips uncritical.
• Media oiled and non-oiled, filtered compressed air, so no separate treatment is needed.

Applications

• Plants operated within the temperature range -10 to +70 °C.
• Replacement of a defective valve of the same type in existing machines.
• Control of double-acting cylinders with an air demand up to 1500 l/min.
• Sequencing of pneumatic axes with connection G 1/4" in handling equipment.

Standards and conformity

The valve carries the ATEX marking II 2G Ex mb IIC T5 IP65 & II 2D Ex mb tb IIIC T95°C IP65 to directive 2014/34/EU.