Air hammer A-300 - Nitto Kohki 90600001

This air hammer strikes at 2.600 min-1 and weighs 1,7 kg, so hard crusts, mill scale and aged coatings can be cleared single-handed. A PT1/4 bushing and PT1/4 hose nipple are supplied for connection, and eye protection is included as well.

• A stroke rate of 2.600 min-1 clears hard crusts, mill scale and aged coatings quickly.
• At 1,7 kg the hammer stays controllable in one hand, including in awkward positions.
• Air consumption of 0,3 m³/min can be covered by a standard workshop compressor.
• A PT1/4 x NPT1/4 bushing and PT1/4 x 1/4 hose nipple are supplied, so the tool is ready to connect.
• Eye protection is part of the delivery and does not have to be sourced separately.

Applications

• Knocking off hard crusts and deposits on steel components
• Removing weld slag and mill scale
• Stripping aged paint before recoating
• Fettling work on castings and welded parts
• Maintenance tasks on machines and fixtures

Standard accessories

• Bushing PT1/4 x NPT1/4 : 1 pc.
• Hose Nipple PT1/4 x 1/4 : 1 pc.
• Eye Protection : 1 pc.

Operating principle

A piston driven by compressed air transfers its blows to the fitted tool at 2.600 min-1. The impact energy acts at a single point at the tool tip on the layer being removed.