Hydraulic cylinder

Hydraulics

Hydraulic cylinders convert hydrostatic pressure into controlled linear force - operating at working pressures up to 250 bar and bore diameters from 25 mm to 200 mm, covering thrust forces from 1.2 kN to over 785 kN. Series such as HDS (double-acting, piston rod thread), HDF (mounting flange), HDQ/HDQS/HDG (rod end variants), and HEQ (single-acting) are engineered to ISO 6020-2 and DIN 24334 mounting standards, with chrome-plated piston rods, high-performance sealing systems, and steel or stainless end caps for service lives exceeding 1,000 km of stroke.

This catalogue covers 742 hydraulic cylinder products and accessories - from individual piston rod materials and hydraulic rod ends to complete double- and single-acting cylinder assemblies. Every series is stocked and cross-referenced to major DIN/ISO interchangeability standards, enabling direct drop-in replacements for Parker, Bosch Rexroth, and Hänchen hydraulic cylinder ranges.

Piston rod material Chrome-plated & stainless steel rods, f7 tolerance, Ra < 0.2 µm surface finish Hydraulic Rod Ends ISO 12240-4 clevis & eye ends, M12-M64 thread, up to 250 bar rated pressure HDS - Piston rod thread, double-acting DIN 24334, bore 25-200 mm, stroke to 2,000 mm, 250 bar max HEQ - Single-Acting Spring-return, bore 32-100 mm, 160 bar rated, ISO 6020-2 footprint HDQS - Rod end, double-acting Spherical rod end, bore 40-160 mm, 250 bar, ISO 6020-2 / DIN 24334 HDQ - Rod end, double-acting Fixed eye rod end, bore 25-200 mm, stroke to 2,000 mm, 250 bar HDF - Mounting flange, double-acting Front/rear flange mount, bore 40-200 mm, ISO 6020-2, 250 bar rated HDG - Rod end, double-acting Clevis rod end, bore 25-160 mm, DIN 24334, up to 250 bar operating pressure

Key technical advantages - Hydraulic Cylinders at a glance

⚡ Up to 250 bar - rated working pressure across all HDS, HDQ, HDF, HDQS and HDG series

↕ Bore 25-200 mm - full range covering thrust forces from 1.2 kN to 785 kN

🛠 Stroke to 2,000 mm - precision-guided, cushioned end positions available on request

⚙ ISO 6020-2 / DIN 24334 - standardised mounting for direct interchangeability

🔍 Ra < 0.2 µm rod finish - hard-chrome piston rods, f7 tolerance, 1,000+ km service life

✓ 6 mounting styles - thread, flange, rod end, clevis, spherical and single-acting spring return

Hydraulic Cylinder Series - Product overview

Series	Actuation	Bore (mm)	Max pressure	Mounting / Rod end	Norm
HDS	Double-acting	25 - 200	250 bar	Piston rod thread	DIN 24334
HEQ	Single-acting	32 - 100	160 bar	Spring return	ISO 6020-2
HDQ	Double-acting	25 - 200	250 bar	Fixed eye rod end	ISO 6020-2
HDQS	Double-acting	40 - 160	250 bar	Spherical rod end	ISO 6020-2 / DIN 24334
HDF	Double-acting	40 - 200	250 bar	Front / rear flange	ISO 6020-2
HDG	Double-acting	25 - 160	250 bar	Clevis rod end	DIN 24334

Typical application areas: Industrial press and clamping systems (ISO 6020-2), mobile hydraulics and construction machinery (DIN 24334), injection moulding and die-casting equipment, agricultural and forestry machinery, steel mill roll-gap control, shipyard and offshore deck equipment (DNV GL), material handling and conveyor lift cylinders, automotive body-in-white assembly lines (IATF 16949), and test bench actuators for fluid power validation (ISO 10100).

✓

742 Hydraulic Cylinder Products HDS, HEQ, HDQ, HDQS, HDF, HDG series - all in one catalogue

📦

ISO 6020-2 / DIN 24334 Compliant Direct interchangeability with Parker, Bosch Rexroth and Hanchen

🛡

Up to 250 bar - Bore 25-200 mm Chrome-plated rods, Ra < 0.2 µm, 1,000+ km rated service life