Pumpensicherheitsblock DBAEE30BH2-2X/315G24K31A1A00E - Bosch Rexroth R901563886

A pump safety block limits system pressure right at the source, before it reaches the actuator. The DBAEE30BH2-2X/315G24K31A1A00E relieves up to 300 l/min and takes its command value as a 0 to 10 V voltage signal.

Benefits

• Pressure adjustment range 6 to 315 bar, rated for 350 bar maximum operating pressure.
• Flow up to 300 l/min through 2 ports in size 32.
• Analog command value 0 to 10 V into the on-board electronics, supply 24 V DC.
• High-pressure flange connection removes a pipe fitting in the pressure branch.
• Pilot-operated poppet seat design, internal hexagon with protective cap against tampering.
• CE conformity, NBR seals, 6.6 kg mass.

Applications

The block sits at the pump outlet of presses, injection moulding machines and hydraulic test rigs and holds system pressure at the value set. The analog signal allows pressure to be changed within the cycle, for example between rapid stroke and pressing stage. NBR seals are fitted for mineral oil of class HL.

Manufacturer

Bosch Rexroth, material number R901563886. The type code DBAEE30BH2-2X/315G24K31A1A00E states the DBA range in size 30 and the 315 bar adjustment range.