Pumpensicherheitsblock DBAW30BH2-2X/210-6EG24N9K4VE - Bosch Rexroth R901535565

This pump safety block differs from the smaller builds through size 32 and the high-pressure flange as its connection type. It processes flow up to 300 l/min, is rated for a maximum operating pressure of 350 bar and weighs 6.4 kg.

Benefits

• High-pressure flange as connection type, designed for mounting on the pump outlet.
• Size 32, flow up to 300 l/min, maximum operating pressure 350 bar.
• Pressure limiting and electrical unloading in one housing.
• Supply voltage 24 VDC, Connector, 3-pole (2 + PE) to EN 175301-803.
• FKM seals, HL hydraulic fluid, CE conformity.
• Weight 6.4 kg.

Application

The block is used on larger hydraulic power units whose pump carries a high-pressure flange as its outlet. It caps system pressure and depressurises the circuit during start-up or idle periods, which relieves the drive motor.

Manufacturer

Bosch Rexroth lists this block under material number R901535565. Mounting dimensions, setting range and characteristic curves for this build are held by the manufacturer.