Pumpenregelsystem SYDFEE-2X/018R-PSC12N00-0000-C0A0EX2 - Bosch Rexroth R901504056

When a fixed displacement pump works permanently against a relief valve, the surplus power ends up as heat in the tank. The SYDFEE-2X with 18 cm³ displacement adjusts its swivel angle electrically and supplies only the flow actually needed, up to 59 l/min at 280 bar.

Benefits

• 18 cm³ variable displacement, giving up to 59 l/min on demand rather than continuously.
• 280 bar nominal pressure with a 250 bar preload valve on this version.
• Swivel angle and pressure control including master and slave operation over the analog interface.
• On-board control electronics on 24 V DC, connected by a 12-pole connector (11 + PE) to EN 175201-804.
• 18.8 kg total weight with an ISO 2-hole flange, geared shaft (S), FKM seals and no through-drive.

Applications

The system feeds injection moulding machines, presses and test benches with holding phases at high pressure and low flow. Because the pump swivels back while holding, power loss and cooling demand drop. HLP is the specified fluid and rotation is clockwise.

Manufacturer

Bosch Rexroth, material number R901504056, product family SYDFEE. Full performance data is in the RD 30030 data sheet for the pressure and flow control system.