Pumpensicherheitsblock DBAEE30BH2-2X/315G24K31A1A00V - Bosch Rexroth R901434904

The voltage output of the existing control system is often enough to set pressure. The DBAEE30 follows a command value of 0 to 10 V, works with on-board electronics and allows 400 l/min at a maximum operating pressure of 350 bar.

Benefits

• Analog command value input 0 to 10 V, straight from the control system
• On-board electronics, supply 24 VDC
• Pressure setting range 6 to 315 bar, pilot-operated poppet valve
• 400 l/min flow, maximum operating pressure 350 bar
• Size 32 high-pressure flange, 7-pole connector (6 + PE) according to EN 175201-804
• FKM seals for HL hydraulic fluid, 7.6 kg

Applications

The block is used on presses and test rigs whose pressure is changed for each part of the cycle. Since the command value is carried as a voltage, a short shielded cable to the control system is enough. The poppet seat design keeps leakage low.

Manufacturer

At Bosch Rexroth the article runs under material number R901434904.