Pumpensicherheitsblock DBAEE25BF2-2X/200G24K31F1A08 - Bosch Rexroth R901375593

The command value arrives as a 4 to 20 mA current loop, which stays clean over longer cable runs and needs no separate calibration point. Hydraulically the block works with two ports and two switching positions at 400 l/min and a maximum of 350 bar.

Benefits

• 4 to 20 mA command input, suited to long signal runs from the control cabinet.
• 400 l/min flow at a maximum operating pressure of 350 bar, size 25.
• On-board electronics on 24 V DC, 7-pole connector (6 + PE) to EN 175201-804.
• Flange connection, NBR seals for HL hydraulic fluid, 5.86 kg.

Application

Plants with distributed control often carry set points as a current loop because the signal is less sensitive to interference. That is exactly what this version is made for. It sits at the pump outlet of a power unit and defines the pressure the pump delivers against.

Manufacturer

The version comes from product family DBA.15,25,30. Bosch Rexroth lists the item under material number R901375593.