Images are examples, some edited with AI. The technical data are authoritative. AI notice
Vane Pump PV7-1X/100-118RE07MC7-16WG - Bosch Rexroth R901348138
A power unit should deliver only as much oil as the machine actually draws. The vane pump PV7-1X/100-118RE07MC7-16WG is of variable displacement, supplies up to 171 l/min and controls up to 160 bar operating pressure through its pressure controller. Displacement 118 cm³, clockwise rotation, with through-drive.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
When a power unit keeps pumping against a relief valve, energy turns into heat. The variable vane pump PV7-1X/100-118RE07MC7-16WG reduces its displacement once the set pressure is reached and supplies up to 171 l/min at a maximum of 160 bar until then.
Benefits
- Variable displacement of size 118 cm³, up to 171 l/min.
- 160 bar maximum operating pressure, held by the built-in pressure controller.
- Controller lockable with K plate, so the setting stays fixed in service.
- Through-drive fitted, a second pump can run from the same shaft.
- Cylindrical shaft end Ø 40 mm with fitting key and 4-hole mounting flange 160B4HW, both according to ISO 3019-2.
- 59 kg, NBR seals, rated for HLP fluid.
Application
In machine tools, presses and test rigs the oil demand varies widely over the cycle. A variable pump covers load peaks with 171 l/min and falls back to control pressure during holding phases. The through-drive allows a second circuit on the same drive shaft. Flange and shaft end to ISO 3019-2 fit common bell housings.
Manufacturer
Bosch Rexroth, material number R901348138, product family PV7...C/D/N/W. Clockwise rotation, version with pressure controller and NBR seals.
Technical data
| Direction of rotation | clockwise rotation |
|---|---|
| Displacement type | variable |
| Max. flow | 171 l/min |
| Product family | PV7...C/D/N/W |
| Through-drive | with |
| Hydraulic fluid | HLP |
| Shaft end | Cylindrical Ø 40 mm with fitting key, ISO 3019-2 |
| Operating pressure, max. | 160 bar |
| Size | 118 cm³ |
| Seals | NBR |
| Mounting flange | 4-hole mounting flange 160B4HW according to ISO 3019-2 |
| Weight | 59 kg |
| Weight | 59.000000 |
| Manufacturer | Bosch Rexroth |
| Hersteller-Nr | R901348138 |
| Zolltarifnummer | 84136061 |
| GPSR Herstellerdaten | Bosch Rexroth AG, Zum Eisengießer 1, DE-97816 Lohr am Main, www.boschrexroth.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Germany |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question




