Pumpensicherheitsblock DBAEE30BH2-2X/315G24K31A1 - Bosch Rexroth R901312120

Built in size 32, this block ties into the pressure line through a high-pressure flange and takes over pressure limiting at the pump outlet. The setting arrives as an analogue 0 to 10 V voltage, flow reaches 400 l/min and operating pressure is capped at 350 bar.

Benefits

• Size 32 with high-pressure flange, installed weight 6.4 kg.
• 400 l/min flow at a maximum operating pressure of 350 bar.
• Analogue 0 to 10 V voltage command at the on-board electronics.
• 24 V DC supply, 7-pole connector (6 + PE) to EN 175201-804, NBR seals.

Application

The block sits at the pressure outlet of a power unit with a large line cross section and protects the downstream circuit. Because the command value is electrical, cycles with changing working pressure run without manual intervention. HL is the intended hydraulic fluid.

Manufacturer

The version belongs to product family DBA.15,25,30. Bosch Rexroth lists the item under material number R901312120.