Pumpensicherheitsblock DBAEE25BH2-2X/350G24K31A1 - Bosch Rexroth R901250542

When a process draws on the full pressure limit of the installation, the setpoint band has to reach just as far. This size 25 safety block can be commanded from 6 to 350 bar and therefore uses the permitted operating pressure of 350 bar in full, at a flow of up to 400 l/min.

Benefits

• Setpoint band of 6 to 350 bar, identical with the permitted operating pressure of the assembly
• Analogue command of 0 to 10 V at the on-board electronics, no extra amplifier needed
• Rated flow of 400 l/min at the high-pressure flange
• Pilot-operated poppet seat stage with internal hexagon under a protective cap
• 7-pole connector to EN 175201-804, 24 VDC, NBR seals and a mass of 5.82 kg

Applications

Typical places of installation are power units of high-pressure presses, clamping systems and materials testing machines. There the limit pressure follows the command from the control system and can be lowered between two strokes. HL serves as the hydraulic fluid.

Manufacturer

Bosch Rexroth assigns this block to the DBA.15,25,30 range. The Bosch Rexroth material number is R901250542.