Pumpensicherheitsblock DBAEE15BH2-2X/200G24K31A1 - Bosch Rexroth R901225541

The block limits pump pressure to a value between 6 and 200 bar set electrically by the controller. It is rated for a flow of up to 300 l/min and an operating pressure of up to 350 bar.

Benefits

• Setting range 6 to 200 bar, fine resolution across the middle pressure band
• Analog command value input 0 to 10 V, supply voltage 24 VDC
• Flow up to 300 l/min, maximum operating pressure 350 bar
• Poppet seat design with a pilot stage, internal hexagon under a protective cap
• High-pressure flange, two ports, weight 6.02 kg

Applications

The block is used in power units whose actuators work below 200 bar and which still need an electrically adjustable safeguard. The controller can set the limit for each step, for instance lower during set-up and higher in production. Sealing is by NBR for hydraulic fluid HL.

Manufacturer

Made by Bosch Rexroth, material number R901225541. Electrical connection is through a 7-pole (6 + PE) connector to EN 175201-804.