Prop-Druckbegrenzung SVT DBET-1-6X/315G24XEJV - Bosch Rexroth R901164642

In a plant located in zone 1 or zone 2 the pressure cut-off has to work without ignition sources and still take its setpoint from the controller. The DBET-1-6X/315G24XEJV does both: it limits pressure proportionally to the command signal up to the 315 bar rating and carries an Ex TR type examination certificate.

Benefits

• 315 bar pressure rating at 420 bar maximum operating pressure, so the margin between the control range and the component limit stays intact in service.
• Increased safety protection type, CCC-Ex conformity with an Ex TR type examination certificate, which removes the need for an additional enclosure.
• Direct actuated poppet seat design in size 6, rated at 2 l/min and therefore sized for pilot oil demand rather than main flow.
• ISO 4401-03-02-0-05 porting pattern, the valve fits the standard size 6 subplate without an adapter.
• FKM seals and 2.9 kg weight, resistant to HL fluid and a one-person exchange.

Applications

The valve is used in hydraulic power units for chemical plants, paint shops and offshore installations, where the location itself forces an Ex approval. A typical duty is limiting the pressure of a pump circuit whose ceiling the controller resets for every process step. As a pilot stage it also sets the pressure of a pilot-operated main stage valve.

Manufacturer

Bosch Rexroth, material number R901164642. Genuine new part, driven by an external amplifier at 24 VDC.