Pumpensicherheitsblock DBAWR40BH2N1X/180-6EG24N9K4E - Bosch Rexroth R901073014

A press power unit working at roughly 180 bar calls for protection set just above that level. This pilot-operated block in size 40 is set between 3.7 and 180 bar, copes with 600 l/min and depressurises the installation through its unloading solenoid.

Benefits

• Pressure setting range of 3.7 to 180 bar with internal hexagon and protective cap
• Rated flow of up to 600 l/min at an operating pressure of 350 bar maximum
• Built-on directional spool valve on 24 VDC, two switching positions and a 3-pole connector to EN 175301-803
• Pressure stage in poppet seat design, so the stage seals well at rest
• Mounted on a high-pressure flange, NBR seals and a mass of 13.95 kg

Applications

The block is used on hydraulic power units with a high flow, for example on presses, shears and test rigs. Solenoid unloading cuts drive power during the pauses between two strokes. HL is the intended hydraulic fluid.

Manufacturer

This version comes from the Rexroth DBA(W) range. The Bosch Rexroth material number is R901073014.