Pumpenregelsystem SYDFEE-2X/028R-PPA12N00-0000-A0B0CX3 - Bosch Rexroth R900738615

Large flows are cheaper to build from several medium pumps than from one very large one. This unit is laid out for master and slave operation, works with pressure control as well as swivel angle control, delivers 84 l/min at 280 bar nominal pressure.

Benefits

• Master and slave operation of several units on one circuit, up to 84 l/min per pump
• 300 bar preload valve for steady inlet pressure in the shared circuit
• 28 cm³ variable displacement, 280 bar nominal pressure, no through drive
• On-board electronics with analog command on 24 VDC, 12-pole connector
• Fitting key shaft, ISO 2-hole mounting flange, FKM seals, 23.8 kg

Application

A fit for power units with staged demand, such as presses with a short rapid stroke, a long holding phase. In the group the master sets the command value, the slave units follow it. HLP hydraulic fluid, clockwise rotation have to be observed.

Manufacturer

Bosch Rexroth lists this product under material number R900738615, type designation SYDFEE-2X/028R-PPA12N00-0000-A0B0CX3, product family SYDFEE. Curves, installation dimensions, limit values are given in data sheet RD 30030.