Locking screw, Exterior hexagonal, G 1 1/2, nickel-plated brass - Riegler 136460
-
This Item:
€20.65
-
Locking screw, Hexagonal socket and flange - Riegler K1706
As low as €0.80Show details
-
Locking screw, Exterior hexagonal - Riegler K1709
As low as €1.16Show details
Locking screw, Exterior hexagonal, G 1 1/2, AF 55, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C Suitable for air, water, oil, steam, etc.
Technical data
| Max. working pressure | 25 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Material | nickel-plated brass CW614N (galvanised nickel-plated) |
| Thread | G 1 1/2 ET |
| L1 | 23.0 mm |
| L2 | 15.0 mm |
| a/f | 55 mm |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: TR
About Caps and Screw plugs
Locking screws and end caps close off unused ports on manifolds, valve blocks and fittings. That allows a plant to be built with spare ports without leaking at the open bore. Threads run from M5 up to G 2 at working pressures of 20 to 60 bar.
What matters when choosing
- The thread follows the port being closed. Parallel G threads are available from G 1/8 to G 2, plus tapered R threads in R 1/8 and R 1/4 and M5 for small bores.
- The thread standard determines where the joint seals. Parallel threads to DIN EN ISO 228-1 need a seal at the shoulder, tapered threads to ISO 7-1 seal in the thread itself.
- For the seal, NBR covers general service. FDA-compliant FPM is chosen where food contact or higher temperatures are involved.
- Material follows the surroundings. Brass CW614N and electroplated nickel-plated brass CW614N for normal use, stainless steel 1.4571 and 1.4404 for corrosive media and cleaning routines.
- Pressure and temperature limit the choice. Working pressure reaches 60 bar, maximum operating temperature is either 80 °C or 150 °C depending on the version.
Typical applications
- Closing unused outlets on compressed air manifolds and valve terminal base plates
- Blanking off ports on air preparation units and cylinders that will be used later
- Sealing test and measuring ports once a pressure test is finished
- Plugging spare ports on hydraulic and oil line blocks
- Securing ports in cleaning and food areas using the FDA-compliant FPM seal
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 253 articles.
| Weight | 0.379000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | MSN290SK112 |
| EAN | 4047322505642 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Turkey |
| Material | Nickel-plated brass CW614N (electroplated nickel finish) |
| Thread | G 1 1/2 AG |
| Working pressure max. [bar] | 25 |
| Norm | DIN EN ISO 228-1 |
| Betriebsdruck max [bar] | 25.000000 |
| Pneumatic connection | G1 1/2 AG |
| Temperature (max.) | 150 |
-
Locking screw, Exterior hexagonal - Riegler K1669As low as €1.00







