Safety valve, preset and lead-sealed, G 3/8", DN 10, 9.00 bar, nickel-plated brass

This spring-loaded safety valve made of nickel-plated brass protects compressed air systems up to a set pressure of 9.00 bar. The stated discharge capacity of 404 m³/h refers to exactly this set pressure. The valve is fitted with the G 3/8" thread in nominal size DN 10.

Benefits

• Discharge capacity of 404 m³/h, referred to the set pressure of 9.00 bar.
• Screwed in through G 3/8" in DN 10 and tightened at the 27 mm wrench flat.
• Dimensions H 95 mm and h 12 mm make planning of tight mounting positions easier.
• FKM seal, covering a temperature range from -25 to +180 °C.
• The set value of 9.00 bar stays traceable and unchanged thanks to the lead seal.

Applications

• Protection of gas lines carrying non-toxic, non-flammable gases up to 9.00 bar.
• Installation in systems with operating temperatures between -25 and +180 °C.
• Test benches and machines where the set pressure of 9.00 bar has to be sealed and documented.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 9 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 9.00 bar. An NPT thread and a setting certificate are available as options.