Safety valve, type-approved, preset and sealed, G 3/8", DN 10, 22.00 bar, stainless steel 1.4571

This free-blowing safety valve protects compressed air systems against exceeding 22.00 bar. At full lift it discharges 935.1 m³/h and thus limits the pressure rise in vessel and pipework. It is fitted with a G 3/8" thread, works in nominal size DN 10 and is made of stainless steel 1.4571.

Benefits

• FKM seal, which covers a temperature range from -25 to +180 °C.
• Overall height 95 mm and screw-in section height 12 mm, so the space required can be determined before installation.
• Body material stainless steel 1.4571, approved for compressed air and other non-toxic, non-flammable gases.
• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 22 bar.

Applications

• Test benches and machines whose system pressure has to be limited to a fixed value.
• Control air circuits that are protected against pressure peaks.
• Manifolds and receivers with a G 3/8" connection.
• Installations with requirements on the resistance of the material stainless steel 1.4571.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 22 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 22.00 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.