Safety valve, preset and lead-sealed, G 3/8", DN 10, 13.10 bar, brass

The set pressure is factory adjusted to 13.10 bar and lead-sealed, so the value cannot be changed unnoticed. When the system reaches this pressure, the valve discharges up to 571.4 m³/h. The brass body carries the G 3/8" connection thread for nominal size DN 10.

Benefits

• Screwed in through G 3/8" in DN 10 and tightened at the 27 mm wrench flat.
• Dimensions H 95 mm and h 12 mm make planning of tight mounting positions easier.
• FKM seal, covering a temperature range from -25 to +180 °C.
• The set value of 13.10 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 571.4 m³/h, referred to the set pressure of 13.10 bar.

Applications

• Protection of gas lines carrying non-toxic, non-flammable gases up to 13.10 bar.
• Installation in systems with operating temperatures between -25 and +180 °C.
• Test benches and machines where the set pressure of 13.10 bar has to be sealed and documented.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 13,1 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 13.10 bar. An NPT thread and a setting certificate are available as options.