Safety valve, preset and lead-sealed, G 3/8", DN 10, 0.80 bar, stainless steel 1.4401

From 0.80 bar upwards this safety valve opens by itself and releases up to 59.4 m³/h of gas to the surrounding air. Once the pressure has dropped it closes again without any intervention. Installation uses the G 3/8" thread, nominal size DN 10 and a body made of stainless steel 1.4401.

Benefits

• The set value of 0.80 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 59.4 m³/h, referred to the set pressure of 0.80 bar.
• Screwed in through G 3/8" in DN 10 and tightened at the 27 mm wrench flat.
• Type approval documented by the marking TÜV.SV...-882.10.D/G.0.35 CE0036 0,8 bar.
• Overall height H of 75 mm and height h of 12 mm, so the space required is known before installation.

Applications

• Use on compressors and air treatment units where up to 59.4 m³/h have to be discharged.
• Protection of gas lines carrying non-toxic, non-flammable gases up to 0.80 bar.
• Installation in systems with operating temperatures between -25 and +180 °C.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.35 CE0036 0,8 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 0.80 bar. An NPT thread and a setting certificate are available as options.