Safety valve, type-approved, preset and sealed, G 3/4", DN 10, 45.00 bar, brass

This safety valve limits the pressure in compressed air systems and opens automatically as soon as 45.00 bar is reached. When it responds, up to 1874.6 m³/h are discharged freely until the system pressure drops below the set value again. The valve body is made of brass and is screwed in via the G 3/4" thread in nominal size DN 10.

Benefits

• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 45 bar.
• Free-blowing design without collecting line, the 1874.6 m³/h are released directly to the atmosphere.
• Self-acting operation without auxiliary power, the valve recloses once the pressure has fallen below 45.00 bar.
• Fixed setting at 45.00 bar and lead-sealed, so the set pressure is protected against unauthorised adjustment.

Applications

• Supply lines for non-toxic and non-flammable gases.
• Test benches and machines whose system pressure has to be limited to a fixed value.
• Control air circuits that are protected against pressure peaks.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 45 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 45.00 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.