Safety valve, preset and lead-sealed, G 3/4", DN 10, 41.00 bar, stainless steel 1.4401

The set pressure is factory adjusted to 41.00 bar and lead-sealed, so the value cannot be changed unnoticed. When the system reaches this pressure, the valve discharges up to 1711.3 m³/h. The stainless steel 1.4401 body carries the G 3/4" connection thread for nominal size DN 10.

Benefits

• Screwed in through G 3/4" in DN 10 and tightened at the 32 mm wrench flat.
• Dimensions H 120 mm and h 16 mm make planning of tight mounting positions easier.
• FKM seal, covering a temperature range from -25 to +180 °C.
• The set value of 41.00 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 1711.3 m³/h, referred to the set pressure of 41.00 bar.

Applications

• Protection of pipes and fittings in compressed air networks with a G 3/4" connection.
• Use on compressors and air treatment units where up to 1711.3 m³/h have to be discharged.
• Protection of gas lines carrying non-toxic, non-flammable gases up to 41.00 bar.

Standards and conformity

The delivery is based on the type approval, documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 41 bar with the notified body CE0036. The set pressure of 41.00 bar is adjusted and sealed at the factory, adjustment on site is not intended. Fixed settings between 0.2 and 50 bar are possible. On request the valve comes with an NPT thread and with a setting certificate.