Safety valve, type-approved, preset and sealed, G 3/4", DN 10, 2.50 bar, stainless steel 1.4401

This safety valve limits the pressure in compressed air systems and opens automatically as soon as 2.50 bar is reached. When it responds, up to 119.1 m³/h are discharged freely until the system pressure drops below the set value again. The valve body is made of stainless steel 1.4401 and is screwed in via the G 3/4" thread in nominal size DN 10.

Benefits

• FKM seal, which covers a temperature range from -25 to +180 °C.
• Overall height 75 mm and screw-in section height 16 mm, so the space required can be determined before installation.
• Body material stainless steel 1.4401, approved for compressed air and other non-toxic, non-flammable gases.
• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.61 CE0036 2,5 bar.

Applications

• Installations with requirements on the resistance of the material stainless steel 1.4401.
• Retrofitting on existing DN 10 vessel ports.
• Protection of compressed air receivers with a permissible operating pressure of 2.50 bar.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.61 CE0036 2.5 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 2.50 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.