Safety valve, type-approved, preset and sealed, G 3/4", DN 10, 15.50 bar, brass

This free-blowing safety valve protects compressed air systems against exceeding 15.50 bar. At full lift it discharges 670.4 m³/h and thus limits the pressure rise in vessel and pipework. It is fitted with a G 3/4" thread, works in nominal size DN 10 and is made of brass.

Benefits

• FKM seal, which covers a temperature range from -25 to +180 °C.
• Overall height 95 mm and screw-in section height 16 mm, so the space required can be determined before installation.
• Body material brass, approved for compressed air and other non-toxic, non-flammable gases.
• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 15,5 bar.

Applications

• Manifolds and receivers with a G 3/4" connection.
• Installations with requirements on the resistance of the material brass.
• Retrofitting on existing DN 10 vessel ports.
• Protection of compressed air receivers with a permissible operating pressure of 15.50 bar.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 15.5 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 15.50 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.