Safety valve, preset and lead-sealed, G 3/4", DN 10, 15.00 bar, stainless steel 1.4401

From 15.00 bar upwards this safety valve opens by itself and releases up to 649.2 m³/h of gas to the surrounding air. Once the pressure has dropped it closes again without any intervention. Installation uses the G 3/4" thread, nominal size DN 10 and a body made of stainless steel 1.4401.

Benefits

• Tested discharge capacity of 649.2 m³/h, which allows the protection to be verified by calculation.
• G 3/4" connection thread in nominal size DN 10, fitted with a 32 mm spanner size.
• The material stainless steel 1.4401 is admitted for compressed air and further non-toxic, non-flammable gases.
• Type approval documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 15 bar.
• Set pressure adjusted to 15.00 bar and sealed at the factory, no readjustment on site is required.

Applications

• Test benches and machines where the set pressure of 15.00 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 15.00 bar.
• Protection of pipes and fittings in compressed air networks with a G 3/4" connection.

Standards and conformity

The valve is type-approved and carries the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 15 bar. The marking states the notified body CE0036 and the set pressure. Delivery is exclusively with a fixed setting, fixed values between 0.2 and 50 bar are possible. A setting certificate and an NPT thread are available as options.