TÜV safety valve for gases, G 1/2" (DN 13), set pressure 0.08 bar, seal FKM

Once installed, the safety valve protects compressed air receivers and gas lines against inadmissible overpressure. Material stainless steel 1.4571 is listed for this version. The data state a set pressure of 0.08 bar.

Benefits

• Set pressure 0.08 bar, set at the factory and sealed.
• Discharge capacity 42.4 m³/h at nominal size DN 13.
• Connection G 1/2" for screwing straight into a receiver or a line.
• Body in 1.4571 with a spring in 1.4310, suitable for non-toxic, non-flammable gases.
• Seal made of FKM for the temperature range -20 to +130 °C.

Applications

In process engineering the valve in 1.4571 protects low pressure equipment at 0.08 bar.

Standards and conformity

The valve is type-tested and carries the TÜV component marking. It is supplied with a fixed, sealed setting, and a 2.2 test certificate is available on request.