Safety valve, preset and lead-sealed, G 1/2", DN 10, 7.90 bar, brass

This spring-loaded safety valve made of brass protects compressed air systems up to a set pressure of 7.90 bar. The stated discharge capacity of 362.8 m³/h refers to exactly this set pressure. The valve is fitted with the G 1/2" thread in nominal size DN 10.

Benefits

• Valve body in brass, matching compressed air and non-toxic, non-flammable gases.
• Type-approved and marked with the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 7,9 bar.
• The set value of 7.90 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 362.8 m³/h, referred to the set pressure of 7.90 bar.
• Screwed in through G 1/2" in DN 10 and tightened at the 27 mm wrench flat.

Applications

• Protection of pipes and fittings in compressed air networks with a G 1/2" connection.
• Use on compressors and air treatment units where up to 362.8 m³/h have to be discharged.
• Protection of gas lines carrying non-toxic, non-flammable gases up to 7.90 bar.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 7,9 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 7.90 bar. An NPT thread and a setting certificate are available as options.