Safety valve, preset and lead-sealed, G 1/2", DN 10, 35.00 bar, nickel-plated brass

From 35.00 bar upwards this safety valve opens by itself and releases up to 1466.2 m³/h of gas to the surrounding air. Once the pressure has dropped it closes again without any intervention. Installation uses the G 1/2" thread, nominal size DN 10 and a body made of nickel-plated brass.

Benefits

• The set value of 35.00 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 1466.2 m³/h, referred to the set pressure of 35.00 bar.
• Screwed in through G 1/2" in DN 10 and tightened at the 27 mm wrench flat.
• Valve body in nickel-plated brass, matching compressed air and non-toxic, non-flammable gases.
• Type-approved and marked with the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 35 bar.

Applications

• Test benches and machines where the set pressure of 35.00 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 35.00 bar.
• Protection of pipes and fittings in compressed air networks with a G 1/2" connection.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 35 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 35.00 bar. An NPT thread and a setting certificate are available as options.