Safety valve, preset and lead-sealed, G 1/2", DN 10, 19.00 bar, stainless steel 1.4401

Wherever a compressed air receiver or a pipe has to be protected against overpressure, this spring-loaded valve does the job without auxiliary power. It responds at 19.00 bar and discharges up to 812.6 m³/h. The connection is the G 1/2" thread in nominal size DN 10, and the body is made of stainless steel 1.4401.

Benefits

• Type-approved and marked with the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 19 bar.
• The set value of 19.00 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 812.6 m³/h, referred to the set pressure of 19.00 bar.
• Screwed in through G 1/2" in DN 10 and tightened at the 27 mm wrench flat.
• Valve body in stainless steel 1.4401, matching compressed air and non-toxic, non-flammable gases.

Applications

• Test benches and machines where the set pressure of 19.00 bar has to be sealed and documented.
• Protection of compressed air receivers with a permissible working pressure of 19.00 bar.
• Protection of pipes and fittings in compressed air networks with a G 1/2" connection.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 19 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 19.00 bar. An NPT thread and a setting certificate are available as options.