Safety relief valve G 2", factory set and sealed, DN 48, 5 bar, brass

Safety valves of this design take over the pressure side protection of receivers and pipe networks. This model opens at 5 bar and discharges up to 4962 m³/h. It has the G 2" connection, nominal size DN 48 and a body in brass.

Advantages

• All metal design in brass, vibration resistant and suitable for continuous use from -20 to +200 °C.
• Compact all metal shape with an overall height H of 282 mm and a height h of 26 mm.
• Type tested and permanently marked with TÜV-SV...-2003.48.D/G.0,62 CE0036 5 bar.
• Discharge capacity of 4962 m³/h at nominal size DN 48, sufficient for protecting correspondingly sized generators.
• Seal in FKM, matched to the set pressure of 5 bar.

Applications

• Compressed air receivers and compressor stations with a permissible working pressure up to 5 bar
• Pipelines and manifolds for non toxic, non flammable gases with a G 2" connection
• Test benches and machines where a discharge capacity of 4962 m³/h has to be protected
• Workshop networks and plant installations that call for a brass valve body

Standards and conformity

The valve is type tested and carries the component marking TÜV-SV...-2003.48.D/G.0,62 CE0036 5 bar together with the CE identification number 0036. It is supplied exclusively with a fixed setting and lead seal. A certification to the ASME Boiler and Pressure Vessel Code, Section VIII Div. 1 and a setting certificate to 3.1 are available on request.