Safety relief valve G 2", factory set and sealed, DN 48, 30 bar, brass

The spring loaded safety valve limits the pressure in compressed air receivers, compressor stations and pipelines to 30 bar. Once the set pressure is reached it opens and discharges up to 21375 m³/h into the atmosphere. Connection G 2", nominal size DN 48, body in brass.

Advantages

• Compact all metal shape with an overall height H of 282 mm and a height h of 26 mm.
• Type tested and permanently marked with TÜV-SV...-2003.48.D/G.0,51 CE0036 30 bar.
• Discharge capacity of 21375 m³/h at nominal size DN 48, sufficient for protecting correspondingly sized generators.
• Connection thread G 2" with 80 mm across flats, mounted with a standard open end wrench.
• Set pressure fixed at 30 bar and lead sealed, so no adjustment is possible during operation.

Applications

• Compressed air receivers and compressor stations with a permissible working pressure up to 30 bar
• Pipelines and manifolds for non toxic, non flammable gases with a G 2" connection
• Test benches and machines where a discharge capacity of 21375 m³/h has to be protected
• Workshop networks and plant installations that call for a brass valve body
• Cold installation points down to -60 °C as well as warm areas up to +225 °C

Standards and conformity

The valve is type tested and carries the component marking TÜV-SV...-2003.48.D/G.0,51 CE0036 30 bar together with the CE identification number 0036. It is supplied exclusively with a fixed setting and lead seal. A certification to the ASME Boiler and Pressure Vessel Code, Section VIII Div. 1 and a setting certificate to 3.1 are available on request.