Safety relief valve G 2", factory set and sealed, DN 48, 22 bar, brass

Protects compressors, receivers and downstream fittings against inadmissible pressure above 22 bar. When it responds, a flow of 15843 m³/h is discharged freely. Built in brass with the G 2" thread and nominal size DN 48.

Advantages

• Seal in FKM, matched to the set pressure of 22 bar.
• Set pressure fixed at 22 bar and lead sealed, so no adjustment is possible during operation.
• Connection thread G 2" with 80 mm across flats, mounted with a standard open end wrench.
• All metal design in brass, vibration resistant and suitable for continuous use from -20 to +200 °C.
• Type tested and permanently marked with TÜV-SV...-2003.48.D/G.0,51 CE0036 22 bar.

Applications

• Compressed air receivers and compressor stations with a permissible working pressure up to 22 bar
• Pipelines and manifolds for non toxic, non flammable gases with a G 2" connection
• Test benches and machines where a discharge capacity of 15843 m³/h has to be protected
• Workshop networks and plant installations that call for a brass valve body

Standards and conformity

The valve is type tested and carries the component marking TÜV-SV...-2003.48.D/G.0,51 CE0036 22 bar together with the CE identification number 0036. It is supplied exclusively with a fixed setting and lead seal. A certification to the ASME Boiler and Pressure Vessel Code, Section VIII Div. 1 and a setting certificate to 3.1 are available on request.