Safety relief valve G 1", factory set and sealed, DN 20, 8 bar, stainless steel 1.4404

Designed for overpressure protection on systems carrying compressed air and other non toxic, non flammable gases. The set pressure of 8 bar is fixed at the factory and the discharge capacity is 1613 m³/h. The stainless steel 1.4404 valve is connected through the G 1" thread at DN 20.

Advantages

• Type tested and permanently marked with TÜV-SV...-2055.20.D/G.0,77 CE0036 8 bar.
• Connection thread G 1" with 41 mm across flats, mounted with a standard open end wrench.
• Compact all metal shape with an overall height H of 111 mm and a height h of 14 mm.
• Set pressure fixed at 8 bar and lead sealed, so no adjustment is possible during operation.
• Discharge capacity of 1613 m³/h at nominal size DN 20, sufficient for protecting correspondingly sized generators.

Applications

• Compressed air receivers and compressor stations with a permissible working pressure up to 8 bar
• Pipelines and manifolds for non toxic, non flammable gases with a G 1" connection
• Test benches and machines where a discharge capacity of 1613 m³/h has to be protected
• Systems with increased demands on the corrosion resistance of material 1.4404

Standards and conformity

The valve is type tested and carries the component marking TÜV-SV...-2055.20.D/G.0,77 CE0036 8 bar together with the CE identification number 0036. It is supplied exclusively with a fixed setting and lead seal. A certification to the ASME Boiler and Pressure Vessel Code, Section VIII Div. 1 and a setting certificate to 3.1 are available on request.