Safety relief valve G 1/2", factory set and sealed, DN 11, 5.8 bar, brass

The spring loaded safety valve limits the pressure in compressed air receivers, compressor stations and pipelines to 5.8 bar. Once the set pressure is reached it opens and discharges up to 383 m³/h into the atmosphere. Connection G 1/2", nominal size DN 11, body in brass.

Advantages

• Discharge capacity of 383 m³/h at nominal size DN 11, sufficient for protecting correspondingly sized generators.
• All metal design in brass, vibration resistant and suitable for continuous use from -20 to +200 °C.
• Seal in FKM, matched to the set pressure of 5.8 bar.
• Compact all metal shape with an overall height H of 66 mm and a height h of 12 mm.
• Connection thread G 1/2" with 27 mm across flats, mounted with a standard open end wrench.

Technical data

Applications

• Compressed air receivers and compressor stations with a permissible working pressure up to 5.8 bar
• Pipelines and manifolds for non toxic, non flammable gases with a G 1/2" connection
• Test benches and machines where a discharge capacity of 383 m³/h has to be protected
• Workshop networks and plant installations that call for a brass valve body

Standards and conformity

The valve is type tested and carries the component marking TÜV-SV...-2055.11.D/G.0,8 CE0036 5,8 bar together with the CE identification number 0036. It is supplied exclusively with a fixed setting and lead seal. A certification to the ASME Boiler and Pressure Vessel Code, Section VIII Div. 1 and a setting certificate to 3.1 are available on request.