Safety relief valve G 1-1/4", factory set and sealed, DN 31, 14 bar, brass

Designed for overpressure protection on systems carrying compressed air and other non toxic, non flammable gases. The set pressure of 14 bar is fixed at the factory and the discharge capacity is 6738 m³/h. The brass valve is connected through the G 1-1/4" thread at DN 31.

Advantages

• All metal design in brass, vibration resistant and suitable for continuous use from -20 to +200 °C.
• Set pressure fixed at 14 bar and lead sealed, so no adjustment is possible during operation.
• Seal in FKM, matched to the set pressure of 14 bar.
• Type tested and permanently marked with TÜV-SV...-2003.31.D/G.0,8 CE0036 14 bar.
• Discharge capacity of 6738 m³/h at nominal size DN 31, sufficient for protecting correspondingly sized generators.

Applications

• Compressed air receivers and compressor stations with a permissible working pressure up to 14 bar
• Pipelines and manifolds for non toxic, non flammable gases with a G 1-1/4" connection
• Test benches and machines where a discharge capacity of 6738 m³/h has to be protected
• Workshop networks and plant installations that call for a brass valve body

Standards and conformity

The valve is type tested and carries the component marking TÜV-SV...-2003.31.D/G.0,8 CE0036 14 bar together with the CE identification number 0036. It is supplied exclusively with a fixed setting and lead seal. A certification to the ASME Boiler and Pressure Vessel Code, Section VIII Div. 1 and a setting certificate to 3.1 are available on request.