Corner safety valve, for compressed air and non-flammable gases, G 3/4", DN 13, 4.0 bar, gunmetal

Every compressed air receiver has to be protected against inadmissible overpressure. This corner safety valve opens at 4.0 bar and blows off 137 m³/h without any control system taking action. The connection is G 3/4" and the nominal size DN 13. A gunmetal body and a seal of FKM allow temperatures of -20 to +200 °C. The height above the connecting face is 70 mm.

Advantages

• Fixed set pressure of 4.0 bar, so the protection is unambiguous without any adjustment on site.
• Gunmetal body, spring steel spring and a seal of FKM, matched to compressed air and other non-toxic, non-flammable gases.
• Connection G 3/4" with nominal size DN 13 and 32 mm across flats, so an ordinary spanner is enough for installation.
• Type tested and marked with the component identification TÜV-SV...-312.13.D/G.0,28 CE0036 4 bar, which simplifies the acceptance of the plant.

Applications

Stationary compressed air systems with a fixed set pressure of 4.0 bar. Vessels and pipework with female thread G 3/4". Plants with operating temperatures within the range -20 to +200 °C. Replacement of a defective safety valve of the same nominal size DN 13.

Standards and conformity

The valve is type tested and carries the component identification TÜV-SV...-312.13.D/G.0,28 CE0036 4 bar. It is supplied with a fixed setting only, so the set pressure of 4.0 bar cannot be altered. A setting certificate to 3.1 is available on request.