Corner safety valve, for saturated steam and compressed air, G 2", DN 25, 10.5 bar, gunmetal

Large boilers and vessels need a correspondingly large discharge cross section so that the pressure really falls in a fault case. This corner safety valve with DN 25 and connection G 2" releases 1175 m³/h of compressed air as soon as 10.5 bar is reached. The gunmetal body and the spring steel spring stay dimensionally stable across the range -40 to +150 °C. The overall height is 155 mm.

Advantages

• Connection G 2" with nominal size DN 25 and 68 mm across flats, so an ordinary spanner is enough for installation.
• Discharge capacity of 1175 m³/h of compressed air at DN 25, sufficient for the matching receiver or compressor.
• Fixed set pressure of 10.5 bar, so the protection is unambiguous without any adjustment on site.
• Temperature range of -40 to +150 °C, which covers outdoor installation and hot media alike.
• Gunmetal body, spring steel spring and a seal of EPDM, matched to steam, compressed air and other non-toxic, non-flammable gases.

Applications

Stationary compressed air systems with a fixed set pressure of 10.5 bar. Vessels and pipework with female thread G 2". Plants with operating temperatures within the range -40 to +150 °C. Replacement of a defective safety valve of the same nominal size DN 25.

Standards and conformity

The valve is type tested and carries the component identification TÜV-SV...-312.25.D/G.0,28 CE0036 10,5 bar. It is supplied with a fixed setting only, so the set pressure of 10.5 bar cannot be altered. A setting certificate to 3.1 is available on request. The version is approved for saturated steam and for steam boilers to TRD group 1.