Corner safety valve, for compressed air and non-flammable gases, G 1-1/2", DN 22, 12.0 bar, gunmetal
Large compressed air receivers and headers call for protection with a sufficient discharge capacity. This corner valve with DN 22 and connection G 1-1/2" releases 1028 m³/h at a set pressure of 12.0 bar. The body is made of gunmetal, the spring of spring steel and the seal of FKM. The permissible temperature range runs from -20 to +200 °C. The overall height is 140 mm and the face-to-centre length 46 mm.
Advantages
- Temperature range of -20 to +200 °C, which covers outdoor installation and hot media alike.
- Fixed set pressure of 12.0 bar, so the protection is unambiguous without any adjustment on site.
- Discharge capacity of 1028 m³/h of compressed air at DN 22, sufficient for the matching receiver or compressor.
- Connection G 1-1/2" with nominal size DN 22 and 56 mm across flats, so an ordinary spanner is enough for installation.
- Corner design with 46 mm face-to-centre length and 140 mm overall height, so the valve adds little to a vessel wall.
Technical data
| Feature | Value |
|---|---|
| Version | for compressed air and other non-toxic, non-flammable gases |
| Connection thread | G 1-1/2" |
| Nominal size DN [mm] | 22 |
| Set pressure [bar] | 12.0 |
| Discharge capacity compressed air [m³/h] | 1028 |
| Temperature range [°C] | -20 to +200 |
| Width across flats [mm] | 56 |
| Face-to-centre length L [mm] | 46 |
| Height h [mm] | 28 |
| Overall height H [mm] | 140 |
| Component identification | TÜV-SV...-312.22.D/G.0,28 CE0036 12 bar |
| Body material | gunmetal |
| Spring material | spring steel |
| Seal material | FKM |
| Media | compressed air and other non-toxic, non-flammable gases |
| Setting | fixed setting, type tested |
Applications
Stationary compressed air systems with a fixed set pressure of 12.0 bar. Vessels and pipework with female thread G 1-1/2". Plants with operating temperatures within the range -20 to +200 °C. Replacement of a defective safety valve of the same nominal size DN 22.
Standards and conformity
The valve is type tested and carries the component identification TÜV-SV...-312.22.D/G.0,28 CE0036 12 bar. It is supplied with a fixed setting only, so the set pressure of 12.0 bar cannot be altered. A setting certificate to 3.1 is available on request.
| Weight | 1.200000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | SVGI 112 22-12 |
| EAN | 4050571676087 |
| Zolltarifnummer | 84814010 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | für Druckluft und andere ungiftige, nicht brennbare Gase |
| Thread | G 1 1/2 |
| Set pressure [bar] | 12,0 |
| Temperaturbereich | -20-200 °C |
