Air service unit, G 3/4", 0.5-10 bar, L 350 mm, automatic drain

Once installed, the air service unit filters the compressed air, regulates it to the set pressure and adds oil. It is supplied with a face-to-face length of 350 mm and an overall height of 300.0 mm. The article is made of zinc die casting Z410 with NBR diaphragm and seals. The version is listed with the G 3/4" port, a pore size of 40 µm and L 350 mm, automatic drain.

Benefits

• Filter, relieving regulator and lubricator on the G 3/4" port.
• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate 170 - 4900 l/min at a filter pore size of 40 µm.
• Oil reservoir 550 cm³ and condensate volume up to 300 cm³.
• Lubricator response limit at 6 bar 170 l/min.
• Automatic venting when the secondary side is over pressure, oil can be topped up under pressure.

Applications

On presses and handling equipment the regulator keeps the pressure steady within 0.5 - 10 bar.